Hardware

• Computer mouse with built-in Skype phone (speaker + microphone + dialpad)
• 128 x 64 pixel LCD screen with back light
• Connect with USB to your computer
• 1000 DPI optical sensor
• Crystal clear audio with 16 bit 48 KHz sampling rate
• Fully compatible with all versions of Skype
• Also compatible with Internercalls, SparVoip, NetAppel, poivY, VoipDiscount, VoipCheap and Web Call Direct.

Warranty: 3 years

Features:

• Transfer speeds of up to 400 MB/s read and up to 300 MB/s write
• Durable slide to connect design to protect the drive, so durable design extends the life of your drive
• Red light indicator LED for read/write activity
• Rubber coated housing protects from drops, spills, and daily abuse
• Retractable design protects USB connector when drive not in use
• Backwards compatible with USB 3.0, USB 2.0 and USB 1.0
• Compatible with legacy and current versions of Windows, Linux 2.4 and later, Mac OS9, OSX, and later.

Specifications:

• Capacity: 512 GB (preformatted with FAT32 and real capacity 461 GB)
• Read speed: upt to 400 MB/s
• Write speed: up to 300 MB/s
• Interface: USB 3.0/3.1 Gen 1 interface
• ML NAND chips for speed read and write
• Color: Black/Blue
• Warranty: 5 years
• Size: 10 × 53 × 21 mm / 0.39 × 2.08 × 0.83 inches
• Weight: 9 g / 0.01 lb (blister: 18 g / 0.03 lb)

Product Name: Elpida 2 GB 2Rx8 PC3-10600S-9-10-F1
Manufacturer: ELPIDA
Form Factor: DD3 SO-DIMM
Memory Capacity: 2 GB
Bus Speed: PC3-10600 (DDR3-1333) 1333 Mhz
Number of Pins: 204
Error Correction: Non-ECC
Voltage: 1.5 V
Organization: 256M words × 64 bits, 2 ranks
Chip Composition: J1108BFBG-DJ-F × 16
Latency (CL - tRCD - tRP): 9 - 9 - 9
PCB Height: 30 mm
Operating Case Temperature Range: 0 ~ 95 ℃
Part Number: EBJ21UE8BFU0-DJ-F
Country/Region of Manufacture: Taiwan
Condition: Used
Compatible: Sony / HP / Apple laptop

Hello Kitty design optical USB mouse with blue/red light.

• Plug & Play: simply plug the USB cable into an available USB port on your laptop or desktop computer and the mouse will be used immediately thereafter (don't need driver and installation)
• compatible with Windows (9x/2k/ME/XP/Vista/NT 4.0/7/8/8.1/10) and Mac OS X operating systems
• 1200 DPI optical resolution
• 3 button layout, scroll wheel acts as third button
• with USB plug, about 143 cm length of cable
• Size: 7.5 × 6.5 × 3 cm
• Weight: 64 g

Crystal Cooler system pulls heat away from the notebook and prevent the CPU from overheating during use

Features:

• 3 Fan USB Cooler
• No power adapter necessary: conveniently powered through USB port
• Great ergonomic shape for easy type
• Notebook Cooling Pad support low noise
• Material: Acrylic
• Speed of 3 Fans USB Cooler: 3000 rpm
• Size of Notebook Cooling Fan: 6 x 6 x 1.5 cm
• Size: 11.8 X 9.8 inch (30 x 25 cm)
• Works fine for laptops either smaller or larger than its size
• USB cable length: 60 cm long about
• Weight: 430g

Package contents:

The Wireless-N Repeater is mainly used for providing WiFi service in big area such as factory, community, hotel, school, office, street or etc. It complies with the IEEE 802.11n standard with wireless transmission speeds of up to 300 Mbps. It has 2 dBi ceramic chip Antennas providing even better wireless performance, transmission rates, stability technology automatically avoids channel conflicts using its channel selection feature. It also works well with other 802.11g and 802.11n protocol wireless products.
The unique universal power adapter design in the world. Save your space, no wiring, more convenient, more beautiful!

Features:

• Improve wireless coverage in all WLAN networks
• Access to the Internet for computers located on the edge or outside of the range of your access point
• Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards
• Provides up to 300 Mbps transmission rates
• Support 2.4 GHz WLAN networks
• Maximum WLAN security with WPA2, WPA and WEP (128/64)
• Software wizard for simple setup
• 2 dBi antennas integrated
• Support Wireless Repeater Mode and Standard AP Mode
• Provides one 10/100 Mbps Auto-Negotiation Ethernet LAN ports

System requirements:

• WLAN access point/client according to IEEE 802.11n/g/b
• 110 ~ 230 V socket
• The WLAN client must support at least the WPA encryption standard
• WLAN access point and the WLAN client with automatic IP address assigment (DHCP)
• Forwarding of IPv4-based protocols/Address Resolution Protocol
• The network name (SSID) of the WLAN access point must be set to broadcast (visible)

Specifications:

• Plug Stand: exchangeable (EU / UK / US / AU)
• Color: White
• Frequency range: 2.4 ~ 2.4835 GHz
• Wireless transmit power: 14 ~ 17 dBm (typical)
• Power supply unit: 100 ~ 240 V AC
• Operating temperature: 0 ~ 40 °C (32 F ~ 104 F)
• Storage temperature: -40 ~ 70 °C (-40 F ~ 158 F)
• Relative humidity: 10 ~ 90 % (Non Condensation)
• Product dimensions: 11 × 6 × 7 cm
• Product weight: 98 g

Package contents:

• 1 × Wireless-N Repeater
• 1 × Networking cable (1 m)
• 1 × User's Manual

The Bitmain Antminer U1 is a USB Bitcoin (BTC) miner that hashes at 1.6 GH/s, but overclocks up to 2.2 GH/s. The miner is very power efficient, pulling only 2 watts. This is a great way to enter the bitcoin mining game. Plug it into a USB, run CGMiner or BFGMiner, and you're set!

Specifications:

• For only Bitcoin mining
• Icuras support SHA256 algorithm
• 2014 model: v1.1 board
• Default hash rate: 1.6 GH/s, can overclock by command up to 2.2 GH/s
• Power consumption: 2 W on USB 5V @ 1.6G
• Power supply: 5 V DC input (from USB)
• Size: 60 × 25 × 10 mm

How to use?

You can use with your computer / laptop (supported OS: Windows, Linux, Mac OS X) or direct with router (OpenWrt / DD-WRT).
Required driver: CP210x USB
Plug in your Antniner U1 to a USB port on your computer / laptop / router.
Start mining software:

cgminer.exe --bmsc-options 115200:20 -o pool_url:pool_port -u worker_name -p worker_password --bmsc-freq 0781
bfgminer.exe -o pool_url:pool_port -u worker_name -p worker_password -S antminer:all --set-device antminer:clock=x0781

To overclock your Antniner U1, you will change that last part of the running parameter. The number following bmsc-freq and antminer:clock=x will change:

• for 1.6 GH/s use 0781 (default)
• for 1.8 GH/s use 0881
• for 2.0 GH/s use 0981
• for 2.2 GH/s use 0A81

Keep in mind that the Antminer gets very hot very quickly when you overclock. Your must add additional cooling to your device. I recommend a strong fan blowing cool air directly onto your Antminer U1!