As we all know, the world we live in is 3-Dimensional, but everything we see through video and images are flat. So this 3Dwebcam is intended to let the true feeling come back, to make our video, image and online chatting be full of fun.
Features:
Supports MSN, Yahoo Messenger, Skype and many other instant chat software
6 pairs of 3D glasses included for your friends and family
Record 3D short videos, you can upload to YouTube and share with them
Take 3D snapshots and email them to your friends with a few clicks
With tens of special effects,including delay shots, continuous shots, recording, animation, frame, bushpencil and lens focus aid function
With Photo capturing and video recording function in both 2D and 3D mode
The BitmainAntminerU1 is a USBBitcoin (BTC) miner that hashes at 1.6 GH/s, but overclocks up to 2.2 GH/s. The miner is very power efficient, pulling only 2 watts. This is a great way to enter the bitcoin mining game. Plug it into a USB, run CGMiner or BFGMiner, and you're set!
Specifications:
For only Bitcoin mining
Icuras support SHA256 algorithm
2014 model: v1.1 board
Default hash rate: 1.6 GH/s, can overclock by command up to 2.2 GH/s
Power consumption: 2 W on USB 5V @ 1.6G
Power supply: 5 V DC input (from USB)
Size: 60 × 25 × 10 mm
How to use?
You can use with your computer / laptop (supported OS: Windows, Linux, Mac OS X) or direct with router (OpenWrt / DD-WRT). Required driver: CP210x USB Plug in your Antniner U1 to a USB port on your computer / laptop / router. Start mining software:
To overclock your Antniner U1, you will change that last part of the running parameter. The number following bmsc-freq and antminer:clock=x will change:
for 1.6 GH/s use 0781 (default)
for 1.8 GH/s use 0881
for 2.0 GH/s use 0981
for 2.2 GH/s use 0A81
Keep in mind that the Antminer gets very hot very quickly when you overclock. Your must add additional cooling to your device. I recommend a strong fan blowing cool air directly onto your Antminer U1!
The Wireless-NRepeater is mainly used for providing WiFi service in big area such as factory, community, hotel, school, office, street or etc. It complies with the IEEE 802.11n standard with wireless transmission speeds of up to 300Mbps. It has 2dBi ceramic chip Antennas providing even better wireless performance, transmission rates, stability technology automatically avoids channel conflicts using its channel selection feature. It also works well with other 802.11g and 802.11n protocol wireless products. The unique universal power adapter design in the world. Save your space, no wiring, more convenient, more beautiful!
Features:
Improve wireless coverage in all WLAN networks
Access to the Internet for computers located on the edge or outside of the range of your access point
Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards
Provides up to 300 Mbps transmission rates
Support 2.4 GHz WLAN networks
Maximum WLAN security with WPA2, WPA and WEP (128/64)
Software wizard for simple setup
2 dBi antennas integrated
Support Wireless Repeater Mode and Standard AP Mode
Provides one 10/100 Mbps Auto-Negotiation Ethernet LAN ports
System requirements:
WLAN access point/client according to IEEE 802.11n/g/b
110 ~ 230 V socket
The WLAN client must support at least the WPA encryption standard
WLAN access point and the WLAN client with automatic IP address assigment (DHCP)
Forwarding of IPv4-based protocols/Address Resolution Protocol
The network name (SSID) of the WLAN access point must be set to broadcast (visible)
Outstanding performance and quiet operation characterizes this great PalitGeForceRTX 3070GameRock8GB GDDR6 (NE63070019P2-1040G) VGA graphics card. The house rumbles, but not the computer case!
The BitmainAntminerU2 is a USBBitcoin (BTC) miner that hashes at 2 GH/s, but overclocks up to 2.4 GH/s, with heatsink. The miner is very power efficient, pulling only 2.95 watts. This is a great way to enter the bitcoin mining game. Plug it into a USB, run CGMiner or BFGMiner, and you're set!
Specifications:
For only Bitcoin mining
Icuras support SHA256 algorithm
2014 model: v1.2 board
Default hash rate: 2 GH/s, can overclock by command up to 2.4 GH/s
Power consumption: 2.95 W on USB 5V @ 2G
Power supply: 5 V DC input (from USB)
Factory heatsink for stable operation
Size: 60 × 25 × 15 mm
How to use?
You can use with your computer / laptop (supported OS: Windows, Linux, Mac OS X) or direct with router (OpenWrt / DD-WRT). Required driver: CP210x USB Plug in your Antniner U2 to a USB port on your computer / laptop / router. Start mining software:
To overclock your Antniner U1, you will change that last part of the running parameter. The number following bmsc-freq and antminer:clock=x will change:
for 2.0 GH/s use 0981 (default)
for 2.1 GH/s use 0A01
for 2.2 GH/s use 0A81
for 2.3 GH/s use 0B01
for 2.4 GH/s use 0B81
Keep in mind that the Antminer gets very hot very quickly when you overclock. Your must add additional cooling to your device. I recommend a strong fan blowing cool air directly onto your Antminer U2!
