With U480errorcodereader, you may quickly find out trouble causes (troubleshooter) of electronically controlled systems on your car, by simply connecting U480 with the 16 PIN diagnostic socket, via reading the trouble code (DTC) shown on U480, identifying, locating and checking out trouble causes with attached user's manual.
Works with all 1996 and newer cars & trucks that are OBDII compliant (including CAN protocol). Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTCs) and turns off check engine light Supports multiple trouble code requests: generic codes, pending codes and manufacturer's specific codes.
This U480 OBD2 reader is designed to read and erasing trouble codes on vehicles with an OBD2 socket produced 1996 and up. Connects to vehicles OBD port under the dash. Please note it only works with check engine related lights. It will not reset air bag lights or lights related to service intervals. U480 also readers CANBUS equipped cars.
What is OBD2 also known as OBDII?
OBDII stands for On-Board Diagnostics, II generation. It is a set of documents issued by SAE and ISO, which describe the interchange of digital information between on-board emission-related Electronic Control Units (ECUs) of road vehicles and an OBD-II scan tool. OBD-II also commonly refers to the physical on-board diagnostic system of a vehicle, which consists of an ECU (or multiple ECUs), Malfunction Indicator Light (MIL), Diagnostic Link Connector (DLC), and the wiring that connect the different elements.
How do I know if this product works with my car?
1996 or newer cars sold in USA
2001 or newer model year gasoline vehicle sold in the European Union
Commission Directive 70/220/EEC (Annex I)
Vehicles with positive-ignition engines
with effect from 1 January 2000 for new types and from 1 January 2001 for all types, vehicles of category M1, except vehicles the maximum mass of which exceeds 2500 kg, and vehicles of category N1 class I, must be fitted with an on-board diagnostic (OBD) system for emission control in accordance with Annex XI. [...]
Note that here "European Union" means countries which were members of the EU in 2000.
2004 or newer model year diesel vehicle sold in the European Union
Commission Directive 70/220/EEC (Annex I)
Vehicles with compression-ignition engines
Vehicles of category M1, except
vehicles designed to carry more than six occupants including the driver,
vehicles whose maximum mass exceeds 2500 kg,
from 1 January 2003 for new types and from 1 January 2004 for all types, must be fitted with an on-board diagnostic (OBD) system for emission control in accordance with Annex XI.
Note that here "European Union" means countries which were members of the EU in 2003.
Other vehicles
Features:
Most 1996 and newer cars & trucks that are OBD II / EOBD compliant including CAN, VPW, PWM, ISO and KWP2000 protocols
Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTCs) and turns off check engine light
Supports multiple trouble code requests: generic codes, pending codes and manufacturer's specific codes
Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
Bicycle and car 1 pair (2 pcs) tyrewheelvalve capLEDneonlight in 4 colors (blue, green, yellow, pink). If you want to add that personal touch to your Car, Bike - lighting is one of the best ways.
Features:
Devised ingenious design, easy to use.
Suitable for bike, motorcycle, electrombile and car.
Colorful light show, very energy saving! Will be off when the vehicle stops, on when it runs, and flash when you're driving at night.
Protecting the air faucet from blocking and flooding water.
Specifications:
Material: Stainless steel
Color: blue, green, yellow, pink
Battery: 3 x 1,5 V AG10 (included)
Dimensions (mm): 63 x 18 x 9
Weight: 22 g / pc
Fit for British mouth, United States mouth, France mouth need to add converter!
Shockproof and slipproof design with new eco-friendly material pad. Comfortable feel, elegant and fashionable. Universal holder for your PDA, cell phone, iPhone 4, iPhone 3GS, iPhone, iPod, MP3, MP4, MP5, GPS, PNA.
Specifications:
Universal mounting solution for your Cell Phone (iPhone 4, iPhone 3GS, iPhone 3G, iPhone and other mobile phones) and portable device (iPod, PDA, GPS, PNA, MP3, MP4, MP5) to mount onto a vent mount on most vehicles
Fit the devices width from 4.8 to 10.5 cm
360 degree rotating support holder
Easy to installation/use: vent mount or attach on any where in your car (with included double-sided adhesive pad)
Can be mounted on the windshield or panel of car
The holder can be flicked up by pressing the button
Soft rubber pads on arms, skidproof and shockproof
(1 Pair) 2 x 5 W 12 V Cardoorlightlogoprojector, light laser lamp, decorative lighting. When opening the door, you will see LED light projection like welcoming you, and emanating charmingly. As the decoretived shadow light, when you stop the car, shadow could be showed on the road. Bring more driving fun to drivers. Elegance for your lovely car, leading the trends of car lighting sources. This fashion is popular among the young and car enthusiasts. Automobile decorative lighting, provide you with delightful light visual experience and more driving fun. The dazzle logo light will display on the ground when you open the door; and will turn of when you close the door. It can be installed in both left and right door. Courtesy door light make your car artistic moreover that atmosphere. Embedded type design will not destroyed the original car appearance. This product is specially designed for auto modification fancier, we purpose to bring more driving fun to drivers. The product can be installed at the body kit, chassis or other suitable place.
Features:
Power: 5 W
Rated voltage: 12 V (fit all 12 V vehicles such as Cars, Trucks, SUVs, and etc.)
Dimensions: 6.5 (length) x 2 (ø) cm
No noise, no pollution without electronic interference, with the German advanced constant-current control technology and shine even, light color full, lasting constant
Suitable for multiple models are (Honda, Mazda, Nissan, Toyota, Lexus, Kia, Hyundai, Volkswagen, BMW, Buick, Ford, Jeep, Porsche, Lamborghini, Ferrari, Infinite, HKS, ABT, IIIM, JP, GARSON, FOX and so on various graphics), please choose by the order comment!
This product is suitable for the market of automobile accessory. It can support GPS navigation, wireless laser/radar detector, camera for reversing car, Bluetooth hands-free communication, AV entertainment applications. It can also be matched with car DVD, audio. It is a perfect solution for automotive electronics.
Features:
GPS navigation: 4.3'' support maps on Windows CE 6.0
This European plastic remote controlled license plate flipper, shifter, rotator frame for have lots of very useful functions:
Designed to fit ideally for European Union license plates (UK, Germany, Ireland, Scotland)
You can flip your license plates instantly, within 2 seconds, you just need to push the button on your remote controller and license plate will flip (together or separately)
They work even you while you drive
You always know whether your license plates are flipped or not - product contains led controller, which indicates the status
License plate flipper works despite bad weather (rain, frost, sunshine, extreme temperature fluctuations) - frames are produced of thick and tough ABS plastic and aluminium
Frames looks like typical car license frames, which makes them discreet
They are very customized and could be used in almost all vehicles (car, truck or SUV).
Why you should have one?
To keep privacy
To use in exhibitions or motor shows
For tuning studios
During riding on closed racetracks.
Car frame shifter, rotator (flipper) for automatic change of car numbers. It is a device for the automatic number plates rotation. The device allow, provides for the installation of two license plates (one fake and one real). And with the remote you can use one plate, while after pressing the button use the other license plate. Plate flippers is a universal license plate flipping bracket that will fit all vehicles. You can change the number plate on one another for auto/motor shows, exhibitions, tunning studios, secret services, event organizations, car clubs and meetings on specialized sites or racetracks. Frame shifter with a change of license plate with registration to an individual or a souvenir - a good way to stand out. Perhaps you remember the movies about James Bond, or Luc Besson's Taxi-driver who used to have a similar device installed in their cars. Many of us were fascinated when it was switched. What once was a science fiction has become a reality now. Control key is in your car in a convenient location for the driver (installation of the remote control). When a key is pressed (or the control) frame turned around 180 degrees, changing one number to another. Metal frame construction covered with tamper-resistant shifter composition. Pull out the number of such scope is much harder than plastic avtoramok, while it is not subject to corrosion and temperature extremes. The device operates not only in the dry state, but also under water. For installation with a nominal registration and license plates, which must be entered in the data sheet. You will not have to with a screwdriver in hand to change their registration numbers on the back and registered for one trip - one keystroke (control buttons). The installation procedure doesn't require cutting into the bumper or vehicle body.
Features
If you have 2 plates - you don't have to change them with a screwdriver, only press the button and plates will be changed.
Fast moves, just needs 2 seconds to flip the frame.
Anti-rust, stable quality, for long term use, reliable mechanism.
Synchronized of (both) the front and rear frame.
The license frame was made by high quality car board material, high intensity, never get rust, can completely afford the sunshine, rain, frost and any high-low temperature or worse environment. Can work even under water.
It has regular form so that the installed device is totally unnoticeable, turning mechanism is hidden behind a removable panel.
Can run at speeds up to 200 km/h (tested).
Installation
From left to right (normally the host installed within range of the dashboard):
Power, to the accumulator
LED, to the host directly, just put it in your sight
B interface, 5 m wire to the Back frame
A interface, 3 m wire to the Front frame.
How to control the frame?
There are 4 buttons on the host, 1 power button and 3 control buttons (A, B, A/B):
Press power button, The LED indicator turns green, at the same time, indicators for the 3 control buttons turn red. Indicate that the systems in working state. When you press the control buttons, the flip frame will auto turn.
A Button: Front frame controlling. Press one time, the front frame auto turn one time, Press A button once again, the front frame will turn back to its initial state.
B button: Back frame controlling. Work the same as A.
A/B button: Front and back frames controlling. Work the same as A, but this button can control the two frames on the same time.
Every set of license plate cover frame has 2 license plates, plate A (front of the car) and plate B (rear of the car). There are 3 buttons (A, B and AB) on the remote controller and main unit, Press A or B button once, the A/B number will flip, press again A or B, the flate will fli again and will show the previous license number. If you press AB button once, you can flip both plates at the same time. There is an LED indicator showing the status of the license plate.
Specifications
Power supply
Voltage: DC 12V
Fixed electric current: 0.6 A
Main material performance: aviation aluminum (black) / stainless steel (1 mm) and plastic
Fixed power: 2 W
Flip Speed: changing one number into another within 2 seconds
Time of ascent and descent: less than 2 seconds
Control distance: about 50 m
Wire length: 3 (front) and 5 (back) m, external indicator light 1 m
Weight: 3 kg
Dimensions: 55 (L) × 2.5 (H) × 16 (W) cm (mounted under the bumper and trunk lid: 145 × 112 × 32 mm, number plate size is 520 × 110 mm)
Package contents
2 × EU flip frames for front and rear of the car
Central unit
LED controller (shows whether plates are flipped or not)
Remote controller
Complete set of cables (power cable can be finished like cigar lighter or to be connected directly to battery)
Microsoft WindowsCE 6.0 operating system (compatible with all major GPS software packages - however hardware specific software such as Garmin may not run on this unit)
OSD Menu Languages: English, German, French, Spanish, Portuguese, Chinese, Japanese, Polish, Turkish, Italian, Hungarian, Czech, Danish, Norwegian, Finish, Greek, Romanian, Eesti, Latviesu, Lietuviu
Built-in 1800 mAh rechargeable Li-Ion battery: up to 3 hours active, 600 hours sleep mode
Dimensions (mm): 196 x 134 x 21
Weights (g): 500
Package contents:
7" High Definition GPS device with iGO and latest EU/USA/Asia/Africa/Australia maps
Car holder: Mounting bracket + Mounting bracket plate
Network charger (100 - 250 V, 50/60 Hz)
Car charger (12 V / 2 A)
USB extension cable
Stereo earphones
Rear view Camera (optional: wired - wireless, wih/without night vision)
This carDVR with 120° wide view angle and 6 IR LED light Camera (dashcam) captures high definition video and displays it on its rotatable 2.5 inch TFT LCD screen. The video is saved in the SD memory card. Supports recycled recording. With the camera holder / mount, you can fix it on the car dashboard or car windshield very easily. The high quality video and audio can be timely and strong evidence to address accident and distinguish responsibility. As long as the vehicle fix with it, you can easily record moving track on your way. Moreover, it can take all kinds of traffic accidents as evidence of the exercise.
Description:
Main Functions: Video and Audio Recording, Motion Detection Auto-Recording, Loop Video Recording, Photo-Taking, etc
Day / Night mode, a variety of built-in scenes for selection
Intellectual control of infrared fill light
Records automatically after the car's power up
High speed recording
Supports Real Time & Date display on video (timestamp)
Quick Snap, Quick Video Recording, Quick Review
Cycled recording and repeat storage by section. Loop video recording, that is deleting old files and then recording new ones automatically
Motion detect function: the DVR Will be recording if there is any object movement and stop recording if no movement, save memory space for you
Can be easily mounted onto the dashboard of your car.
Specifications:
Image Sensor: 1/4 color CMOS Image Sensor
120° viewing angle
2.5" TFT Colorful Monitor
Screen rotation angle: 270°
With 6 IR LED's, support night vision
Built-in microphone an speaker
Video Format: AVI, resulotion:
1280 x 960 pixels (WXGA), 30 fps (interpolated by software)
720 X 480 pixels (WVGA), 30 fps (interpolated by software)
AV-in for rear view camera/video camera (optional)
Mini-USB (2.0) connection port
Active sync with your PC/Laptop
with uSD card expandable (up to 16 GB)
Built-in speaker: 8 Ω, 1 W
COM port (COM7, 38400 bps) for TMC
Auido jack earphone output
MP3/AVI/DivX/JPEG palying, formats:
Audio: MP3, WMA, WAV, MID
Video: AVI, DVIX, XVID, FLV, WMV, ASF, 3GP, MP4
Photo: JPG, GIF, BMP, PNG
eBook: TXT, XML, PDF
Microsoft WindowsCE 6.0 Pro operating system (compatible with all major GPS software packages - however hardware specific software such as Garmin may not run on this unit)
Word/Excel/PDF viewer
OSD Menu Languages: English, German, French, Spanish, Portuguese, Chinese, Japanese, Polish, Turkish, Italian, Hungarian, Czech, Danish, Norwegian, Finish, Greek, Romanian, Eesti, Latviesu, Lietuviu
Built-in 1200 mAh rechargeable Li-Ion battery: up to 3 hours active, 600 hours sleep mode
Dimensions (mm): 130 x 80 x 13 (ultra thin slim)
Weights (g): 350
Package contents:
5" High Definition iPNA GPS device with iGO and latest EU/USA/Asia/Africa/Australia maps
Car holder: Mounting bracket + Mounting bracket plate
